Installing die-cut vinyl lettering
Check the supplied material instructions and application conditions first. Work on a clean, dry, suitable surface.
1. Clean the surface using a method compatible with the vehicle finish and let it dry.
2. Measure the design and check its position.
3. Secure the transfer tape with a masking-tape hinge.
4. Peel the backing carefully and apply with a squeegee, working steadily from the center outward.
5. Remove transfer tape slowly at a low angle; stop if lettering lifts.
6. Inspect adhesion and follow the supplied care guidance.
Do not apply over loose paint, rust, wax or contamination. Ask for help if the surface is unsuitable.
1. Clean the surface using a method compatible with the vehicle finish and let it dry.
2. Measure the design and check its position.
3. Secure the transfer tape with a masking-tape hinge.
4. Peel the backing carefully and apply with a squeegee, working steadily from the center outward.
5. Remove transfer tape slowly at a low angle; stop if lettering lifts.
6. Inspect adhesion and follow the supplied care guidance.
Do not apply over loose paint, rust, wax or contamination. Ask for help if the surface is unsuitable.